Comparison of dark resistance vs. fill factor with double contact to improve efficiency in BC-BJ photovoltaic cells
DOI:
https://doi.org/10.55204/trc.v3i1.e113Keywords:
FF (Fill Factor), BC-BJ (Back Contact – Back Junction), Efficiency (n), Resistance Dark series (Rs DARK)Abstract
The improvement of efficiency in photovoltaic cells has been increasing in function of the construction of new elements to optimize the use of solar energy, however, the factors that contribute to the decrease in efficiency have never been studied, nor have the measures to counteract the losses caused by the dark resistance generated by a second contact. In this paper we use the experimental method to demonstrate the improvement of efficiency with a second moving contact in the emitter and thus identify the increase in performance at each position that is moving at the bottom of the cell, we discovered that in the case of the 100 m contact, it achieves an efficiency improvement of 22.109% (distance 500 m, Jsc = 40.25 mA / cm2, Voc = 673 mV, FF = 81.618%, Rs DARK = 0.13064). Similarly, it is plotted in a reference system as a function of dark resistance and fill factor where we find the problems that are generated by changing the position of the contact, which causes a decrease in efficiency, therefore it is concluded that by increasing a second contact in the emitter which is moving in each position the parasitic resistances tend to increase and generate a decrease in the fill factor, the present work proposes to reduce the problems in the dark resistances that are generated.
Downloads
References
Alex Walker, J. F. (2010). Understanding Synopsys Sentaurus by Simulating a P-N Junction. Canada.
Altermatt P.P., Dreissigacker S., Yang Y., Sprodowski C., Dezhdar T., Koc S., Veith B., Herrman S., Bock R., Bothe K. Schmidt J., Brendel R. (2009). Highly predictive modelling of entire Si solar cells for industrial applications. Conference: European Photovoltaic Solar Energy Conference, At Hamburg, Germany, 24, 901-906.
Altermatt, P. P. (2011). Models for numerical device simulations of crystalline silicon solar cells—a review. Journal of Computational Electronics, 10(3), 314-330. DOI: https://doi.org/10.1007/s10825-011-0367-6
Bennett, H. B. (1983). Hole and Electron Mobilities in Heavily Doped Silicon: Comparison of Theory and Experiment. Solid-St. Electron, 26(12), 1157–1166. DOI: https://doi.org/10.1016/0038-1101(83)90143-0
Blatt, F. (1957). Scattering of carriers by ionized impurities in semiconductors. J. Phys. Chem. Solids, 1(4), 262–269. DOI: https://doi.org/10.1016/0022-3697(57)90014-8
Finder. (09 de 2011). El mundo sustentable de las energías renovables . Recuperado el 20 de 05 de 2014, de www.findernet.com
Häcker Rolf, Hangleiter Andreas. (1994). Intrinsic upper limits of the carrierlifetime in silicon. Journal of Applied Physics, 75(11), 7570-7572. DOI: https://doi.org/10.1063/1.356634
Haouari-Merbah M., Belhamel M., Tobias I. and Ruiz J. (2005). Method of extraction and analysis of solar cell parameters from the dark current-voltage curve. Proc. Spanish Conference on Electron Devices,Tarragona, Spain, 275-277. DOI: https://doi.org/10.1109/SCED.2005.1504377
Honsberg Christiana, B. S. (10 de 10 de 2013). PV CDROM (Christiana Honsberg and Stuart Bowden). Recuperado el 15 de 01 de 2014, de pveducation.org/
Jan Schmidt and Armin G Aberle. (1997). Accurate method for the determination of bulk minority-carrier lifetimes of mono-and multicrystalline silicon wafers. Journal of Applied Physics, 81(9), 6186-6199. DOI: https://doi.org/10.1063/1.364403
Klaassen, D. B. (1992). A Unified MobilityModel for Device Simulation—I. Model Equations and Concentration Dependence. Solid-State Electronics, 35(7), 953–959. DOI: https://doi.org/10.1016/0038-1101(92)90325-7
L. Huldt, N. G. Nilsson, and K. G. Svantesson. (1979). The temperature dependence of band-to-band Auger recombination in silicon. Applied Physics Letters, 35(10), 776-777. DOI: https://doi.org/10.1063/1.90974
M. Rüdiger, M. Rauer, C. Schmiga and M. Hermle. (2011). Effect of incomplete ionization for the description of highly aluminum-doped silicon. J. Appl. Phys., 110, 024508. DOI: https://doi.org/10.1063/1.3603043
P.P. Altermatt, J.O. Schumacher, A. Cuevas, M.J. Kerr, S.W. Glunz, R.R. King, G. Heiser, A. Schenk. (2002). Numerical modeling of highly doped Si:P emitters based on Fermi–Dirac statistics and self-consistent material parameters. J. Appl. Phys., 92(6), 3187-3199. DOI: https://doi.org/10.1063/1.1501743
R. Bock, P.P. Altermatt, J. Schmidt, R. Brendel. (2010). Formation of aluminum–oxygen complexes in highly aluminum-doped silicon. Semicond. Sci. Technol., 25, 105007. DOI: https://doi.org/10.1088/0268-1242/25/10/105007
Ridley, B. K. (1988). Quantum processes in semiconductors. Oxford, Clarendon Press.
Schmidt J., Thiemann N., Bock R. and Brendel R. (2009). Recombination lifetimes in highly aluminum-doped silicon. J. Appl. Phys., 106(9), 093707 - 093707-4. DOI: https://doi.org/10.1063/1.3253742
Sentaurus Device User Guide, Version D-2010.03, March 2010. (2010). Synopsys Inc.
SYNOPSYS. (2011). Sentaurus Structure Editor User Guide. version F-2011.09.
W. Lochmann and A. Haug. (1980). Phonon-Assisted Auger Recombination in Si with Direct Calculation of the Overlap Integrals. Solid State Communications, 35(7), 535-556. DOI: https://doi.org/10.1016/0038-1098(80)90896-0
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Alfonso Gunsha Morales, Jorge Murillo Oviedo, Paola Proaño Molina

This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors retain the moral and patrimonial rights of their works. They only give to the magazine Tesla Revista Científica the right to the first publication of this. Since Tesla Revista Científica is an open access publication, readers can fully or partially reproduce its content as long as they properly credit the corresponding authors and the journal itself. Tesla Revista Científica undertakes not to make commercial use of the texts it receives and/or publishes.
Our journal is governed by the international policies SHERPA/RoMEO: Green journal: They allow the self-archiving of both the pre-print (draft of a paper) and the post-print (the version corrected and reviewed by peers) and even the final version ( layout as it will be published in the journal).
See also "Copyright and licences".



