Estabilidad del color de la resina compuesta precalentada como agente cementante en restauraciones cerámicas indirectas: Revisión sistemática
DOI:
https://doi.org/10.55204/trc.v5i1.e465Palabras clave:
resina compuesta precalentada, cemento resinoso, restauraciones cerámicas indirectasResumen
Introducción: La cementación adhesiva en restauraciones cerámicas indirectas constituye un paso crítico que influye directamente en el resultado estético y la longevidad del tratamiento restaurador.
Objetivo: Esta revisión sistemática evaluó la evidencia científica disponible sobre la estabilidad del color de las resinas compuestas precalentadas cuando se utilizan como agente cementante en restauraciones cerámicas indirectas.
Resultados: Los hallazgos sugieren que las resinas precalentadas presentan estabilidad cromática comparable a los cementos resinosos tradicionales, con valores ΔE dentro del rango clínicamente aceptable en la mayoría de los estudios analizados. Sin embargo, la heterogeneidad metodológica limita la extrapolación de los resultados a la práctica clínica. Factores como el espesor cerámico, la opacidad del material y el protocolo de precalentamiento influyen significativamente en la estabilidad del color.
Conclusiones: Las restauraciones con espesores mayores a 1.5mm y el uso de cementos translúcidos mostraron los mejores resultados en términos de estabilidad cromática. Las principales limitaciones identificadas incluyen la heterogeneidad metodológica entre estudios y el enfoque exclusivo en investigaciones in vitro. Se requieren ensayos clínicos controlados a largo plazo para validar estos hallazgos en condiciones clínicas reales.
Descargas
Citas
Ahamed, S. A. S., Raheel, S. A., Ajmal, M. B., Kaur, M., Alqahtani, N. M., Tasleem, R., Bahamdan, G. K., Hegde, M., & Bhavikatti, S. K. (2023). Evaluation of Color Stability of Composite Resin Used to Characterize Acrylic Teeth—An In Vitro Study. Applied Sciences, 13(3), 1498. https://doi.org/10.3390/app13031498
Aiqahtani, M. Q., Aijurais, R. M., & Aishaafi, M. M. (2012). The effects of different shades of resin luting cement on the color of ceramic veneers. Dental Materials Journal, 31(3), 354-361. https://doi.org/10.4012/dmj.2011-268
Archegas, L. R. P., Freire, A., Vieira, S., Caldas, D. B. D. M., & Souza, E. M. (2011). Colour stability and opacity of resin cements and flowable composites for ceramic veneer luting after accelerated ageing. Journal of Dentistry, 39(11), 804-810. https://doi.org/10.1016/j.jdent.2011.08.013
Barbon, F. J., Isolan, C. P., Soares, L. D., Bona, A. D., De Oliveira Da Rosa, W. L., & Boscato, N. (2022). A systematic review and meta-analysis on using preheated resin composites as luting agents for indirect restorations. Clinical Oral Investigations, 26(4), 3383-3393. https://doi.org/10.1007/s00784-022-04406-z
Carrabba, M., Vichi, A., Tozzi, G., Louca, C., & Ferrari, M. (2022). Cement opacity and color as influencing factors on the final shade of metal‐free ceramic restorations. Journal of Esthetic and Restorative Dentistry, 34(2), 423-429. https://doi.org/10.1111/jerd.12587
Chen, X.-D., Hong, G., Xing, W.-Z., & Wang, Y.-N. (2015). The influence of resin cements on the final color of ceramic veneers. Journal of Prosthodontic Research, 59(3), 172-177. https://doi.org/10.1016/j.jpor.2015.03.001
Czigola, A., Abram, E., Kovacs, Z. I., Marton, K., Hermann, P., & Borbely, J. (2019). Effects of substrate, ceramic thickness, translucency, and cement shade on the color of CAD/CAM lithium‐disilicate crowns. Journal of Esthetic and Restorative Dentistry, 31(5), 457-464. https://doi.org/10.1111/jerd.12470
Daokar, D. S., Sarak, D. K., Pawar, D. K., Ranjalkar, D. A., Vyavahare, D. S., & Gaysmindar, D. S. (2023). To Evaluate Effect of Preheated Composite Resin on Its Colour Stability When Immersed in Three Different Solutions – An in Vitro Study. 8(5).
Dede, D. Ö., Armaganci, A., Ceylan, G., Çankaya, S., & Çelık, E. (2013). Influence of abutment material and luting cements color on the final color of all ceramics. Acta Odontologica Scandinavica, 71(6), 1570-1578. https://doi.org/10.3109/00016357.2013.777114
Dede, D. Ö., Ceylan, G., & Yilmaz, B. (2017). Effect of brand and shade of resin cements on the final color of lithium disilicate ceramic. The Journal of Prosthetic Dentistry, 117(4), 539-544. https://doi.org/10.1016/j.prosdent.2016.07.014
Dede, D. Ö., Sahin, O., Özdemir, O. S., Yilmaz, B., Celik, E., & Köroğlu, A. (2017). Influence of the color of composite resin foundation and luting cement on the final color of lithium disilicate ceramic systems. The Journal of Prosthetic Dentistry, 117(1), 138-143. https://doi.org/10.1016/j.prosdent.2016.05.016
Faris, T. M., Abdulrahim, R. H., Mahmood, M. A., Mhammed Dalloo, G. A., & Gul, S. S. (2023). In vitro evaluation of dental color stability using various aesthetic restorative materials after immersion in different drinks. BMC Oral Health, 23(1), 49. https://doi.org/10.1186/s12903-023-02719-3
Fernández, E. (2014). Instrumentación para el registro del color en odontología – Review. Revista Dental de Chile, 104(3), 3-7.
Gugelmin, B. P., Miguel, L. C. M., Baratto Filho, F., Cunha, L. F. D., Correr, G. M., & Gonzaga, C. C. (2020). Color Stability of Ceramic Veneers Luted With Resin Cements and Pre-Heated Composites: 12 Months Follow-Up. Brazilian Dental Journal, 31(1), 69-77. https://doi.org/10.1590/0103-6440202002842
Karaagaclioglu, L., & Yilmaz, B. (2008). Influence of Cement Shade and Water Storage on the Final Color of Leucite-reinforced Ceramics. Operative Dentistry, 33(4), 386-391. https://doi.org/10.2341/07-61
Kilinc, E., Antonson, S. A., Hardigan, P. C., & Kesercioglu, A. (2011). Resin cement color stability and its influence on the final shade of all-ceramics. Journal of Dentistry, 39, e30-e36. https://doi.org/10.1016/j.jdent.2011.01.005
Kürklü, D., Azer, S. S., Yilmaz, B., & Johnston, W. M. (2013). Porcelain thickness and cement shade effects on the colour and translucency of porcelain veneering materials. Journal of Dentistry, 41(11), 1043-1050. https://doi.org/10.1016/j.jdent.2013.08.017
Önöral, Ö., Günal-Abduljalil, B., & Ongun, S. (2021). Effect of color of the cement and the composite resin foundation on the resultant color of resin-matrix ceramics. The Journal of Prosthetic Dentistry, 125(2), 351.e1-351.e7. https://doi.org/10.1016/j.prosdent.2020.09.021
Perroni, A. P., Amaral, C., Kaizer, M. R., Moraes, R. R. D., & Boscato, N. (2016). Shade of Resin‐Based Luting Agents and Final Color of Porcelain Veneers. Journal of Esthetic and Restorative Dentistry, 28(5), 295-303. https://doi.org/10.1111/jerd.12196
Pires, L. A., Novais, P. M. R., Araújo, V. D., & Pegoraro, L. F. (2017). Effects of the type and thickness of ceramic, substrate, and cement on the optical color of a lithium disilicate ceramic. The Journal of Prosthetic Dentistry, 117(1), 144-149. https://doi.org/10.1016/j.prosdent.2016.04.003
Tomaselli, L. D. O., Oliveira, D. C. R. S. D., Favarão, J., Silva, A. F. D., Pires-de-Souza, F. D. C. P., Geraldeli, S., & Sinhoreti, M. A. C. (2019). Influence of Pre-Heating Regular Resin Composites and Flowable Composites on Luting Ceramic Veneers with Different Thicknesses. Brazilian Dental Journal, 30(5), 459-466. https://doi.org/10.1590/0103-6440201902513
Turgut, S., & Bagis, B. (2011). Colour stability of laminate veneers: An in vitro study. Journal of Dentistry, 39, e57-e64. https://doi.org/10.1016/j.jdent.2011.11.006
Turgut, S., & Bagis, B. (2013). Effect of resin cement and ceramic thickness on final color of laminate veneers: An in vitro study. The Journal of Prosthetic Dentistry, 109(3), 179-186. https://doi.org/10.1016/S0022-3913(13)60039-6
Uctasli, M., Garoushi, S., Uctasli, M., Vallittu, P., & Lassila, L. (2023). A comparative assessment of color stability among various commercial resin composites. BMC Oral Health, 23(1), 789. https://doi.org/10.1186/s12903-023-03515-9
Yildirim, B., Recen, D., & Tekeli Simsek, A. (2021). Effect of cement color and tooth‐shaded background on the final color of lithium disilicate and zirconia‐reinforced lithium silicate ceramics: An in vitro study. Journal of Esthetic and Restorative Dentistry, 33(2), 380-386. https://doi.org/10.1111/jerd.12611
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
Derechos de autor 2025 Jeanyna Vanessa Jaramillo Romero, Bolívar Andrés Delgado Gaete

Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
Los autores conservan los derechos morales y patrimoniales de sus obras. Puesto que Tesla Revista Científica es una publicación de acceso abierto, los lectores pueden reproducir total o parcialmente su contenido siempre y cuando proporcionen adecuadamente el crédito a los autores correspondientes y a la revista misma. Tesla Revista Científica se compromete a no hacer uso comercial de los textos que recibe y/o publica.
Nuestra revista se rige por las politicas internacionales SHERPA/RoMEO: Revista verde: Permiten el autoarchivo tanto del pre-print (borrador de un trabajo) como del post-print (la versión corregida y revisada por pares) y hasta de la versión final (maquetada tal como saldrá publicada en la revista).
Véase también "Derechos de autor y licencias".